Every great build starts on the bench, not in the paint booth. If your masking lines are ragged, your seams are rough, or you've dropped a photo-etch fret for the third time this month, the fix usually isn't more patience — it's better tools. We'll be restocking five Tamiya essentials that solve those exact headaches, and every one of them ships fast from our Florida warehouse.
Tamiya Masking Tape — 6mm & 10mm
Crisp, razor-straight paint lines without a single bit of bleed-through — that's the promise of Tamiya's masking tape, and it's one of the few tapes that actually delivers. It's thinner and lower-tack than hardware-store tape, so it hugs curves and panel lines instead of lifting or tearing your paint on removal.
Grab the 6mm roll (item 87030) for canopy frames, stripes, and tight curves, or the 10mm roll (item 87031) for larger panels and two-tone paint schemes. Both come in Tamiya's built-in dispenser case, so the roll stays clean and you get a straight, even pull every time — no more hunting for scissors mid-paint session.
Order today — ships in 3–5 business days.
Tamiya Basic File Set (74104)
Sink marks, injection pin nubs, and rough sprue gates disappear fast with the right file in hand. This three-piece set gives you 5mm, 4.5mm, and 2.5mm profiles — flat, half-round, and a fine point — covering everything from broad panel seams down to tight cockpit detail and photo-etch edges.
The comfort-grip handles mean you can work a seam for minutes at a time without hand fatigue, and the fine-cut teeth leave a smooth finish that's ready for primer with barely any sanding afterward. Proof it works: this is the same file set you'll see in Tamiya's own how-to-build guides.
Order today — ships in 3–5 business days.
Tamiya Craft Tools Tweezers — Straight & Curved
Small parts have a way of vanishing the moment you reach for them with your fingers. Tamiya's Craft Tools tweezers are precision-ground to a needle point, so you can pick up a 1/700 railing or a tiny decal without it pinging across the workbench.
The straight pair (74004) is your go-to for general assembly and decal placement, while the curved pair (74003) angles around raised details so you can approach a part from the side instead of straight down — a real help inside tight cockpits and engine bays. The matte-black anti-glare finish means no reflections messing with your eyes under bench lighting either.
Order today — ships in 3–5 business days.
Round Out Your Bench Today
None of these tools cost more than a few dollars, but together they'll save you hours of frustration and noticeably clean up the finish on your next build. Pick up one or grab the whole set — either way, if something's not right when it arrives, our 30-day returns have you covered.
Trusted by over 30,000 customers since 2011
Free shipping on USA orders over $100 | 30-day returns
www.shorelinehobby.com
Comments